Other methods of connection may not offer the same level of protection. Remember, Butt splices are useful for their rapid installation and durability. 100 Pcs/50 Pairs T-Tap Wire Connectors, Ginsco Quick Splice Self-Stripping Electrical T-tap Wire Terminals with Nylon Fully Insulated Male Spade Connector Quick Disconnects Kit for Wiring Automotive 4. After crimping, perform the tug test to make sure the wires don't pull out. We'll repeat the process on the other side with a larger wire. This crimp bends the connector around the wire which creates a solid connection. Now, the splice is crimped with the proper tool. Insert the wire making sure the insulation touches the butt splice, otherwise you run the risk of a weaker connection. Make sure your wires butt up against that. If you look inside the butt splice you will see an indentation. The first step is to make sure you have correctly stripped the wires to the proper length. So, you could use step down tinned butt splices to connect a 10 gauge wire to a 14 AWG wire, or connect a 14 AWG wire to two 14 gauge wires. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.Step down tinned butt splices are used to connect different gauge wires together or multiple wires of the same size. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. Cold temperature rated to -45 degree C. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series). Part Number: OL-38509 (Pack of 4) Color: Black. Specification: Material: Built Tough 6061-T6 Aluminum. Dual rated for use with copper and/or aluminum cables. From automobiles to regular household electrical connectors, our line splice connector products are made to ensure that they stand the test of time without any wear and tear. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. ISR series insulated in-line splice connectors are suitable for connecting 2-wires. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. ![]() Not for consumer sale or use.ģM industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. ![]() Contact customer service at 80 to request a certificate. Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Category 6/6A(6) Category 7(6) Fault Managed Power Systems (FMPS)(9) HDMI 2.0. Some products contain imported components. Plugs are marked with min and max wire size for easy identification, cool temperature rated at -45C and accepts 6 to 2/0 AWG CU or AL solid. The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. AICD2-0-1 is an insulated inline splice connector made from high strength 6061-T6 aluminum, dipped in black dielectric plastisol and prefilled with an oxide inhibitor to prevent rusting.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |